The GY-LS300 uploads completed clips to arbitrary FTP, SFTP, implicit FTPS, or explicit FTPES servers through a supported HOST USB adapter. The camera and browser interfaces provide single, multiple, all, and OK-marked clip selection.
Menu path: HOST USB adapter > Main Menu > System > Network/Settings > Connection Setup > Wizard > Main Menu > System > Network/Settings > Clip Server > Clip-FTP1..4 > Media mode > thumbnail > LOLUX/3 > FTP Upload > Web browser > Clip List > Upload. Protocols: FTP · SFTP · FTPS implicit · FTPES explicit. Sends: recorded video clips on SD media.
Documented from the manufacturer manual. Sources reviewed .
TransportWi-Fi adapter through HOST USB + Ethernet adapter through HOST USB + cellular modem through HOST USB
Payloadrecorded video clips on SD media
Triggersmanual clip upload from thumbnail view / selected or all-clip upload / browser-triggered clip upload
Before you touch the menu
What to gather
01Current manufacturer firmware.
02A supported HOST USB Wi-Fi, Ethernet, or cellular adapter.
03A recorded test clip.
04Camera to Anywhere server, protocol, port, credentials, and directory.
05Known secure-protocol server fingerprint.
Connection fields
Alias
Short destination name.
Appears in the FTP Upload chooser.
Protocol
FTP, SFTP, FTPS (implicit), or FTPES (explicit).
Matches endpoint security.
Server
Hostname or IP only.
Identifies the receiver.
Port
Assigned listener port.
Selects the correct service.
Dir. Path
Assigned remote input path.
Routes the clip.
Username
Per-source username.
Authenticates and identifies the source.
Password
Issued password.
Completes authentication.
PASV Mode
On for FTP-family protocols behind NAT; unavailable for SFTP.
Provides a firewall-friendly data channel.
The menu, step by step
01
HOST USB adapter
Attach the supported network adapter with power off.
MANUFACTURER MANUAL EXCERPT · 1/1
Reviewed menu evidence for GY-LS300 from the archived manual, page 123.
A same-name destination file triggers overwrite confirmation unless the connection uses an HTTP FTP proxy.
Camera mode can be restored while upload continues.
Limits and warnings
A supported HOST USB adapter is required.
An HTTP FTP proxy restricts the connection to FTP and suppresses overwrite confirmation.
Browser operations are disabled while a browser-initiated upload is running.
Do not overwrite a same-name destination file until its identity is verified.
Prove it on your body
Run this checklist on the exact body, firmware, network, and media format you will use on assignment.
FTP resume was added in firmware 2.04; use the newest compatible firmware. Resume remains unavailable when SFTP is selected; use JVC's current supported-adapter list. Physical Camera to Anywhere interoperability is not yet lab-verified.
01Firmware is current.
02Adapter and network IP are valid.
03Profile and fingerprint are verified.
04One clip uploads with matching bytes.
05A browser-selected clip reaches the same destination.
06A same-name test prompts before overwrite when no HTTP FTP proxy is configured.
If it will not send
01Cannot connect
Verify adapter, IP/DNS/gateway, host, port, and venue firewall.
02Invalid login/path
Correct profile credentials and Dir. Path.
03Fingerprint differs
Stop and verify the endpoint rather than accepting an unexpected key/certificate.
04Transfer repeatedly times out
Use a more stable network path and retry the same completed clip.
Sources
The local archive keeps this research reproducible if an official link changes. It is not redistributed through this site.
01
JVC GY-LS300 Instructions
Printed pp. 124-125, Clip Server; pp. 151-153, Uploading a Recorded Video Clip