Sony PXW-X70 FTP setup

FTPAccessory-assisted camera client2014

PXW-X70 can initiate FTP transfer of XAVC clips, MPEG HD clips when licensed, AVCHD clips, proxy clips over built-in Wi-Fi; wired Ethernet via VMC-UAM2 plus CBK-NA1. The documented route accepts a user-configured server; it is suitable for a destination-neutral ingest gateway after protocol, firmware, and payload testing.

Menu path: Attach and configure the network adapter > Open the adapter web UI or Content Browser Mobile > Upload Server / FTP Server Settings > Select media → Transfer > Auto Upload, when supported. Protocols: FTP. Sends: XAVC clips · MPEG HD clips when licensed · AVCHD clips · proxy clips.

Documented from the manufacturer manual. Sources reviewed September 14, 2026.

Transportbuilt-in Wi-Fi + wired Ethernet via VMC-UAM2 plus CBK-NA1

PayloadXAVC clips · MPEG HD clips when licensed · AVCHD clips · proxy clips

Triggersselected clip upload from thumbnail/web workflow

Before you touch the menu

What to gather

01Use the documented network path: built-in Wi-Fi; wired Ethernet via VMC-UAM2 plus CBK-NA1.
02Install or attach the required components: VMC-UAM2 USB adapter cable and CBK-NA1 network adapter kit for wired LAN.
03Prepare a reachable FTP endpoint with a writable destination and a camera-specific credential.
04Firmware/license qualification: FTP upload requires firmware 2.00 or later; MPEG HD recording requires the applicable license.

Connection fields

Server Name

An operator-facing destination label.

Distinguishes the production ingest endpoint from vendor-cloud presets or prior assignments.

Server Address / URL

The DNS host or IP value specified by the FTP endpoint.

Directs the camera or adapter to the destination-neutral server.

Protocol / secure connection

A mode explicitly supported by this path: FTP.

Must match the listener and its certificate/security configuration.

Port

The port issued with the ingest credential.

Avoids relying on defaults when the gateway uses a dedicated listener.

User Name / Password

A least-privilege credential unique to the camera or event.

Permits isolation, audit, and fast revocation.

Destination Directory

The assigned remote folder, without adding an unverified web URL prefix.

Routes clips into the correct job inbox.

Active / Passive

Match the server; passive is normally required through venue NAT.

Controls how the FTP data channel is opened.

The menu, step by step

Attach and configure the network adapter

Power the documented Sony adapter and establish its Wi-Fi, wired, or mobile-data route before opening transfer controls.

Related Sony professional camera menu reference showing the Network File Transfer Server Settings path and FTP destination fields — RELATED MODEL MENU REFERENCE · 1/1Shown on Sony PXW-Z200/HXR-NX800; labels can vary on this camera.
Closest reviewed Sony professional-camera reference for the Network, File Transfer and Server Settings sequence.
Sony PXW-Z200/HXR-NX800 Help Guide · PDF p. 190 ↗Related-model instructional excerpt from an official Sony help guide; copyright remains with Sony.

Open the adapter web UI or Content Browser Mobile

Use the interface documented for the camera/adapter firmware; the transfer destination is stored by the adapter workflow.

Upload Server / FTP Server Settings

Create a destination with protocol, host, credentials, and directory.

Related Sony professional camera reference for password, passive mode, destination directory and secure FTP settings — RELATED MODEL MENU REFERENCE · 2/2Shown on Sony PXW-Z200/HXR-NX800; labels can vary on this camera.
Closest reviewed Sony professional-camera reference for password, passive mode, destination directory and secure-transfer fields.
Sony PXW-Z200/HXR-NX800 Help Guide · PDF p. 191 ↗Related-model instructional excerpt from an official Sony help guide; copyright remains with Sony.

Select media → Transfer

Choose the documented payload (XAVC clips, MPEG HD clips when licensed, AVCHD clips, proxy clips) and submit it to the saved server.

Related Sony professional camera reference for selecting and transferring proxy or original clips — RELATED MODEL MENU REFERENCE · 1/1Shown on Sony PXW-Z200/HXR-NX800; labels can vary on this camera.
Closest reviewed Sony professional-camera reference for selecting a clip and starting a transfer job.
Sony PXW-Z200/HXR-NX800 Help Guide · PDF p. 193 ↗Related-model instructional excerpt from an official Sony help guide; copyright remains with Sony.

What moves, and what does not

Transfer modes

Manual path: selected clip upload from thumbnail/web workflow.
The cited path is manual; do not promise automatic upload without model/firmware-specific verification.
Where chunked proxy upload is offered, treat it as a distinct mode from post-recording original-file upload.

Media behavior

Documented payload classes: XAVC clips, MPEG HD clips when licensed, AVCHD clips, proxy clips.
Proxy, original/high-resolution, partial, and chunked transfers are separate choices where present; verify the selected type before the event.
Use the camera or adapter job/status list as the first completion signal, then verify the object at the destination.

Limits and warnings

Required path/hardware: VMC-UAM2 USB adapter cable and CBK-NA1 network adapter kit for wired LAN.
A product may also advertise a vendor-cloud workflow; this guide uses only the documented arbitrary-server path and does not treat vendor-cloud-only upload as interchangeable.
FTP upload requires firmware 2.00 or later; MPEG HD recording requires the applicable license

Prove it on your body

Run this checklist on the exact body, firmware, network, and media format you will use on assignment.

FTP upload requires firmware 2.00 or later; MPEG HD recording requires the applicable license Physical Camera to Anywhere interoperability is not yet lab-verified.

01Register one test server and make it the explicit destination.
02Upload a short proxy or small clip and confirm the transfer job reaches Completed.
03Open the received file and compare its size/duration with the source clip.
04Record which camera/adapter firmware, accessory, protocol, and port passed the test.
05If auto or chunk upload is enabled, record a short new clip and verify the expected original/proxy behavior.

If it will not send

01The File Transfer menu is missing or disabled.

Verify required firmware, option license, adapter attachment, recording state, and that the selected network mode permits file transfer.

02The server cannot be registered.

Confirm host syntax, protocol and port, DNS, passive/active mode, credentials, and the writable destination path.

03Proxy arrives but the original does not.

Check payload selection, auto-upload mode, recording codec/licence restrictions, media availability, and whether original transfer starts only after recording stops.

04A queued job repeatedly resumes or fails.

Check link stability, free storage, server timeout/size limits, adapter power, and camera job-list error text before retrying.

Sources

The local archive keeps this research reproducible if an official link changes. It is not redistributed through this site.

01
Official manufacturer HTML guide
FTP transfer and wired LAN option
Open manufacturer source ↗

no-official-pdf-located · retrieved 2026-08-26T04:40:28Z

Have this camera? Help us test the path.

Join for free