Nikon Z 9 FTP setup

FTP · FTPS · SFTPDirect camera client2021

The Nikon Z 9 can send JPEG, HEIF, NEF (RAW), movie files, RAW video files, and a configured MP4 companion directly to an FTP, FTPS, or SFTP server over built-in Wi-Fi or Ethernet. Camera to Anywhere supplies one isolated camera login and can route each completed ingest to cloud storage or a NAS.

Menu path: MENU > Network menu > Connect to FTP server > Network settings > Create profile > Choose protocol > Enter FTP server details > Connect to FTP server > Options. Protocols: FTP · FTPS · SFTP. Sends: JPEG · HEIF · NEF (RAW) · movie files · RAW video files · MP4 companion to RAW video when configured.

Documented from the manufacturer manual. Sources reviewed September 14, 2026.

Transportbuilt-in Wi-Fi + built-in Ethernet

PayloadJPEG · HEIF · NEF (RAW) · movie files · RAW video files · MP4 companion to RAW video when configured

Triggersnew photos as taken / selected stills / movie files / RAW plus MP4 or MP4-only video upload

Before you touch the menu

What to gather

01A supported Z 9 body or, for an accessory guide, a camera listed as compatible by Nikon.
02No external transmitter is required for at least one documented network path; use only interfaces named in the manufacturer source.
03Current mutually compatible camera/transmitter firmware, a charged battery or continuous event power, and a writable memory card containing a supported file.
04A network path documented for this setup: built-in Wi-Fi, built-in Ethernet.
05A Camera to Anywhere input gallery with a dedicated host, port, username, secret, destination directory, and any certificate or host-key data.
06A venue LAN or phone/dedicated hotspot without a captive-portal step on the camera and with outbound access to the configured FTP-family ports.

Connection fields

Protocol

The Camera to Anywhere profile choice supported by this body: FTP, FTPS, SFTP

The camera and ingest listener must use the same FTP-family protocol.

Server address / host name

The host name shown in the Camera to Anywhere input-gallery connection card; omit https:// and any path.

Camera FTP fields expect a server address, not a browser URL.

Port

The exact port published with the input-gallery credentials.

Camera to Anywhere may expose different listeners for FTP, explicit FTPS, or SFTP; do not assume a default.

Login name

The per-camera or per-job ingest username.

A scoped identity lets the gateway route and revoke one camera without changing every shooter.

Password / authentication secret

The generated secret shown once for this ingest identity.

The gateway rejects anonymous uploads and uses the credential envelope only for this input.

Target folder / directory

The destination path shown for the input gallery, including leading slash only when the connection card includes it.

The path is a routing key; changing its spelling can create a different server folder.

Passive mode

Use the passive-mode value shown by Camera to Anywhere; prefer passive when the camera offers it behind venue NAT.

Passive data connections are usually more compatible with hotspots and venue firewalls.

FTPS certificate / root certificate

Import or select the CA/root certificate specified by Camera to Anywhere when the camera manual requires certificate validation.

FTPS must authenticate the ingest endpoint before credentials and media are transmitted.

SFTP host key confirmation

Approve only the server fingerprint displayed by Camera to Anywhere.

Matching the host key prevents connecting to an impersonated SFTP endpoint.

The menu, step by step

Network settings > Create profile

Choose Connection wizard. Use the built-in wireless LAN for Wi-Fi, or connect an Ethernet cable to the camera's Ethernet connector for wired setup.

MANUFACTURER MANUAL EXCERPT · 1/2

Open Connect to FTP server > Network settings, then choose Create profile to begin the Z 9 connection wizard.

Nikon Z 9 Reference Guide · PDF p. 352 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

MANUFACTURER MANUAL EXCERPT · 2/2

Connection wizard gathers the route in order; Configure manually exposes General, Wireless, TCP/IP, and FTP groups for direct editing.

Nikon Z 9 Reference Guide · PDF p. 353 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

Enter FTP server details

Enter address, port, login method, username/password, and destination folder from Camera to Anywhere.

Nikon Z 9 screens for choosing FTP SFTP or FTPS and entering the FTP server port number — MANUFACTURER MANUAL EXCERPT · 1/3
Choose the protocol issued by Camera to Anywhere, then enter the exact listener port shown on the connection card.
Nikon Z 9 Reference Guide · PDF p. 355 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

Nikon Z 9 FTP login method screen with Anonymous login and Enter user ID choices — MANUFACTURER MANUAL EXCERPT · 2/3
Choose Enter user ID for the private Camera to Anywhere username and password; do not use anonymous login for an isolated input gallery.
Nikon Z 9 Reference Guide · PDF p. 356 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

Nikon Z 9 FTP destination folder screen with Home folder and Enter folder name choices — MANUFACTURER MANUAL EXCERPT · 3/3
Choose Home folder unless the input-gallery card specifies another destination folder that already exists on the server.
Nikon Z 9 Reference Guide · PDF p. 356 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

Connect to FTP server > Options

Enable Auto upload for new photographs. The Nikon manual requires videos to be selected manually from playback.

MANUFACTURER MANUAL EXCERPT · 1/2

The active profile is shown in green in Connect to FTP server when the route is connected.

Nikon Z 9 Reference Guide · PDF p. 357 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

MANUFACTURER MANUAL EXCERPT · 2/2

The Connect to FTP server status screen shows the active profile, current file, signal or Ethernet state, and estimated remaining work.

Nikon Z 9 Reference Guide · PDF p. 376 ↗Instructional excerpt from an official Nikon manual; copyright remains with Nikon. Do not publish without a documented rights decision.

What moves, and what does not

Transfer modes

Automatic: new photos as taken.
Manual: selected stills.
Manual: movie files.
Manual: RAW plus MP4 or MP4-only video upload.

Media behavior

Still payloads documented by the manufacturer: JPEG, HEIF, NEF (RAW).
Video payloads documented by the manufacturer: movie files, RAW video files.
Proxy behavior documented by the manufacturer: MP4 companion to RAW video when configured.
The camera writes the source file to its card first; Camera to Anywhere receives a transmitted copy and does not replace in-camera media management.
Treat the camera send mark as transport state, not cloud-delivery proof; confirm the asset appears in the Camera to Anywhere input gallery and destination activity log.

Limits and warnings

Firmware 3.00 added FTPS.
Nikon warns in current Z-series reference guides that Internet FTP connections and third-party FTP server software are not supported; Camera to Anywhere compatibility therefore requires an explicit per-model field test despite standards-compatible protocol support.
Videos are not uploaded automatically; select them manually from the playback display.
Venue Wi-Fi client isolation does not block a camera from reaching a public Camera to Anywhere host, but captive portals, outbound-port filtering, weak signal, and phone hotspot sleep can still prevent or interrupt transfer.

Prove it on your body

Run this checklist on the exact body, firmware, network, and media format you will use on assignment.

Firmware 3.00 added FTPS. Nikon's manual says Internet FTP connections and third-party FTP-server software are not supported; Camera to Anywhere must validate interoperability on real hardware. Physical Camera to Anywhere interoperability is not yet lab-verified.

01Confirm Z 9 and every required transmitter/adapter run a compatible firmware combination.
02Create a dedicated Camera to Anywhere ingest identity for Z 9; do not reuse a destination OAuth token as a camera password.
03Match protocol (FTP/FTPS/SFTP), host, port, username, target directory, and passive/security options to the connection card.
04Send one small still or clip and wait for the camera transfer-complete mark.
05Verify the received file size and checksum in the Camera to Anywhere input gallery before enabling automatic or batch transfer.
06Test the exact recording codec/container and proxy setting planned for the event; a successful JPEG test does not prove video compatibility.
07Trigger the configured destination route and confirm its activity log independently from camera ingest.
08Lock the working camera profile against accidental edits and retain a second known-good profile or printed connection card for event recovery.

If it will not send

01The camera cannot find or connect to the server

Confirm the camera has an IP address, the hotspot has Internet access, the host field contains no URL scheme/path, and the venue permits the published control and data ports.

02Login or destination-folder error

Re-enter the scoped username and secret, preserve case, and copy the target directory exactly; create a fresh ingest credential if the secret may have been exposed.

03Small files work but RAW or video stalls

Check remaining card space, battery/power, hotspot sleep settings, passive-mode configuration, signal strength, gateway size limits, and whether the camera permits that file type in the selected transfer mode.

04FTPS/SFTP security validation fails

Match the selected protocol and port, refresh the camera clock, reinstall the required CA certificate for FTPS, or verify the SFTP host fingerprint against the Camera to Anywhere connection card.

05The camera says sent but the destination does not show the asset

First verify the input gallery received the complete file, then inspect routing-node status; camera success covers the ingest hop, not Dropbox, NAS, or another downstream destination.

06Retries create duplicates or overwrite a prior file

Use a unique camera/job prefix and review the body manual overwrite/rename setting; Camera to Anywhere should deduplicate by upload identity and checksum rather than filename alone.

Sources

The local archive keeps this research reproducible if an official link changes. It is not redistributed through this site.

01
Official manufacturer evidence
Connecting to FTP Servers via Ethernet or Wireless LAN; profile setup, server type, login, and destination folder
Open manufacturer source ↗
02
Official manufacturer PDF archive source
Reference Guide PDF pp. 352-357 (wireless setup), 367-372 (Ethernet setup), and 373-376 (upload and status).
Open manufacturer source ↗

archived-local-ignored · retrieved 2026-08-26 · 994 pages

Have this camera? Help us test the path.

Join for free